MIL-DTL-713F
Table IV. Sampling for tests.
No. of units in lot
Sample size
800 or less
2
801 up to and including 22,000
3
22,001 and over
5
Table V. Test methods.
No. of
Requirement
determinations per
Characteristic
reference
Test method
individual sample
Results reported as
unit
Ply
3.3.1
1/
-
-
1/
-
-
Twist (twine)
3.3.1
Mercury and
3.4.1 and
1/
-
-
copper content
3.4.2
2611 2/
-
-
Wax content
3.4.1.1 and
(Extractable matter)
3.4.2.1
Fungus resistance
3.4.2.2
5760
1
Growth or no growth
effectiveness
Length per pound
3.6
4010
3
Avg. of 3 deter. to
nearest 1 yard
Breaking strength
3.6
6016
5
Avg. of 5 deter. to
nearest 0.5 pound
Elongation
3.6
6016
5
Avg. of 5 deter. to
nearest 0.1 percent
Stiffness
3.6.1
4.3.1
5
Avg. of 5 deter. to
nearest 1/32 inch
1/
Unless otherwise specified, a certificate of compliance will be acceptable for these requirements.
2/
The extractable matter shall be determined using the chloroform extraction procedure of Method 2611.
Test methods.
4.3
Stiffness (applicable only to type N twine). The twine shall be extended as a cantilever beam for a
4.3.1
distance of 3-1/4 inches. The twine shall then be straightened by running the fingers lightly over it once or twice.
Not less than 10 seconds later, the deflection at the free end shall be measured (see 3.6.1).
5.
PACKAGING
5.1
Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract
or order (see 6.2). When packaging of material is to be performed by DoD or in-house contractor personnel, these
personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging
requirements are maintained by the Inventory Control Point's packaging activities within the Military Service or
Defense Agency, or within the military service's system commands. Packaging data retrieval is available from then
managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contracting the responsible packaging activity.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business