INCH POUND
MIL-DTL-713F
8 JULY 2009
SUPERSEDING
MIL-T-713E
14 June 1977
DETAIL SPECIFICATION
TWINE, FIBROUS: IMPREGNATED, LACING AND TYING
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1
Scope. This specification covers the requirements of twine suitable for lacing and tying (see 6.1).
1.2
Classification. The twine will be of the following types, treatments, and classes as specified (see 6.2).
Type N, waxed
- Vegetable fiber
Type P, unwaxed
- Polyamide (nylon)
Type P, waxed
- Polyamide (nylon)
Class 1
- 70 pounds minimum breaking strength
Class 2
- 48 pounds minimum breaking strength
Class 3
- 32 pounds minimum breaking strength
2.
APPLICABLE DOCUMENTS
2.1
General. The documents listed in this section are specified in section 3, 4, or 5 of this standard. This section
does not include documents cited in other sections of this standard or recommended for additional information or as
examples. While every effort has been made to ensure the completeness of this list, document users are cautioned
that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not
they are listed.
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center Philadelphia,
ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or email to dscpg&inspeccomments@dla.mil.
Since contact information can change, you may want to verify the currency of this address information using the
ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4020
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business