MIL-DTL-713F
Identification. Each holder of twine shall have a label attached in such a manner as to remain in place
3.8
and be clearly legible until all twine has been removed. The label shall be legibly printed, stamped, or typed with
water insoluble ink. The label shall contain the following information:
Stock number
Nomenclature
Specification number
Type, treatment, and class
Length or weight
Contract number and date
Contractor's name
3.9
Workmanship. The finished twine shall conform to the quality and grade of product established by this
specification.
4.
VERIFICATION
Certificate of compliance. When certificates of compliance are submitted, the Government reserves the
4.1
right to check test such items to determine the validity of the certification.
4.2
Conformance inspection. Unless otherwise specified, sampling for inspection shall be performed in
accordance with ASQ Z1.4. Unless otherwise specified, the Acceptable Quality Limits (AQLs) listed in this section
shall be used to establish the sample sizes, however, the acceptance number shall be zero.
4.2.1
Inspection of components and materials. Components and materials shall be inspected in accordance
with all requirements of referenced specifications, drawings, and standards unless otherwise excluded, amended,
modified or qualified in the specification or applicable purchase documents. A contractor's certificate of compliance
will be acceptable for the requirements listed in table II.
Table II. Material inspection.
Material identification
3.2.1 and 3.2.2
Twist (singles)
3.3.1
4.2.2
Examination of the end item for visual defects. The defects listed in table III shall be counted regardless
of their proximity to each other. The sample unit for this examination shall be one tube or spool of twine. The lot
size for this examination shall be expressed in units of one tube or spool. The acceptable quality limit (AQL) shall
be 4.0 defects per 100 units. The inspection level shall be level I. Not less than 100 feet in each sample unit shall
be subjected to visual examination.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business