MIL-DTL-226G
4.2.4.1 Determination of staining. The specimen shall be wrapped a sufficient number of times around
a 4 by 4 inch steel plate to produce an exposed area of at least 2 square inches. A piece of filter paper,
Whatman No. 1 or equivalent, shall be placed on the wrapped halyard to produce a load of 2 pounds per
square inch for 1 hour. The weight shall then be removed and the filter paper examined for evidence of stain.
5.
PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract
or order (see 6.2). When packaging of material is to be performed by DoD or in-house contractor personnel,
these personnel need to contact the responsible packaging activity to ascertain packaging requirements.
Packaging requirements are maintained by the Inventory Control Point's packaging activities within the Military
Service or Defense Agency, or within the military service's system commands. Packaging data retrieval is
available from then managing Military Department's or Defense Agency's automated packaging files, CD-ROM
products, or by contracting the responsible packaging activity.
6.
NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
Intended use. The halyards are intended for use as flag halyards and distance lines.
6.1
Ordering data. Acquisition documents should specify the following:
6.2
(a)
Title, number, and date of this document.
(b)
Class required (see 1.2, 3.3, and 3.4).
(c)
Size (circumference) required (see table I).
(d)
Packaging requirements (see 5.1)
6.3 Recycled material. It is encouraged that recycled material be used when practical as long as it meets
the requirements of this document (see 3.2).
6.4
Subject term (key word) listing.
Coils
Core
Reels
Spools
6.5 Changes from previous issue. Marginal notations are not used in this revision to identify changes with
respect to the previous issue due to the extensiveness of the changes.
Custodians:
Preparing activity:
Army GL
DLA IS
Air Force 99
(Project 4020-2009-001)
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using
the ASSIST online database at https://assist.daps.dla.mil .
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business