MIL-DTL-226G
4.2.4 End item testing. The methods of testing specified in FED-STD-191, wherever applicable, and as
listed in table VI shall be followed. The physical and chemical values specified in section 3 apply to the
average of the determinations made on a sample unit for test purposes as specified in the applicable test
methods. When the data in the "Number of determinations" and "Results reported as" columns are not
specified in the table, they shall be as required by the referenced test method. The sample size shall be in
accordance with table V. All test reports shall contain the individual values utilized in expressing the final result.
The sample unit for testing shall be one coil or spool (reels). The lot size shall be expressed in units of coils or
spools (reels). The lot shall be unacceptable if one or more sample units fail to meet any requirement. Tests to
determine compliance with document requirements including quantity of delivery may be made under prevailing
atmospheric conditions, except as specified herein. In cases of dispute, the test shall be made upon material
which has reached equilibrium under standard conditions as defined in section 4 of FED-STD-191.
Table V. Sampling for tests.
Lot size (coils or spools, reels)
Sample size
800 and under
2
801 up to and including 22,000
3
22,001 and above
5
Table VI. End item tests.
Number of
Requirement
Test
determinations per
Results
Characteristic
paragraph
method
individual single unit
reported as
Construction:
1/
--
--
Class 1
3.3.1
Class 2
3.3.2
1/
--
--
Circumference
Table I
6003
3
--
No. of carriers
Table I
Visual
3
Avg. of 3 determinations to
nearest whole number
Ends per carrier
Table I
Visual
3
Avg. of 3 determinations to
nearest whole number
Length per pound
Table I
6004
3
--
Breaking strength
Table I
6016
--
--
Picks per inch
Table I
6001
1
Pass or fail
No. of core yarns
Table I
Visual
1
Pass or fail
(class 2)
Water adsorption
3.4.2.3
6011
--
--
(class 2)
Chloroform soluble
3.4.2.4
2611
--
--
material (class 2)
Staining
3.5
4.2.4.1
1
Pass or fail
1/
Unless otherwise specified, a contractor's certificate of compliance shall be furnished and will be
accepted for the stated requirement.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business