A-A-52088A
3.4 Identification. Each tube shall have a label attached in such a manner as to remain in place and be clearly legible until all rope has been removed.
3.4.1 Ticket. Each tube or coil shall have a ticket (identification tag) attached to it for identification purposes. The ticket shall conform to the requirements of A-A-59622.
3.4.2 Marking. All entries on the ticket or label shall be legibly printed, stamped, or typed with water insoluble ink, and shall contain the following information:
National stock number (NSN) Nomenclature
Commercial Item Description number
Length
Date of manufacture (month and year) Contract number and date
Contractor's name
4. REGULARTORY REQUIREMENTS
4.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. QUALITY ASSURANCE PROVISIONS
5.1 Product Conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
5.2 Quality conformance inspection. Unless otherwise specified, sampling for inspection shall be performed in accordance with ASQ Z1.4
5.3 End item visual examination. Each lot of rope shall be examined for consumer type defects, defined as follows:
Defects in design, construction, workmanship; Any cut, chafe, damage or splice; kink, darting yarn, knot, broken or loose end, bulged strand; color not as specified; any spot or stain clearly noticeable; put-up not as specified; identification tag or ticket omitted, incorrect, or not as specified.
The lot size shall be expressed in units of tubes or coils of rope. The sample unit shall be one tube or coil of rope. Ten percent of the length contained on each sample unit, but not less than 100 feet, shall be examined. The inspection level shall be I, and the acceptable quality limits (AQL) shall be 4.0.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business