A-A-52082D
3.6.1 Finish A - Natural. No finish shall be added.
3.6.2 Finish C - Synthetic rubber. Tape shall be uniformly impregnated with a synthetic rubber or elastomer finish. Treated tape shall contain 7-17% rubber by weight. (see 5.2.1)
3.7 Deleted.
3.8 Put-up. Unless otherwise specified, the tape shall be furnished on parallel wind spools (reels) or universal wind tubes (holders). Size 2 tape shall be put-up in a minimum of 250 yard lengths, and size 4 and 5 tapes shall be put-up in a minimum of 500 yard lengths. The tape shall be free from twists, lumps, or projecting ends and shall be evenly wound so that each turn and layer is free from entanglement and twisting. There shall be no more than four pieces per reel or holder, and no piece shall be less than 50 yards in length.
3.9 Breaking strength Minimum breaking strength shall be as stated in Table 1 when tested as specified in FED-STD-191 Method 4108
3.10 Fungus resistance. No tape shall show visible growth (to the naked eye) of fungus on the surface of the test specimens when tested as specified in FED-STD-191 Method 5760.
3.11 Blocking. There shall be no visible damage or removal of the coatings on finish C tapes when tested as specified in 5.2.3.
3.12 Accelerated aging. When specified (see 7.4), finish C tapes shall show no evidence of stiffness, brittleness, softness, or tackiness when tested as specified in FED-STD-191 Method 5852, except that the specimen shall be six inches in length by the full width of the tape.
3.13 Identification. Tape shall be tagged with a label or ticket containing at least the following information: CID part number, National Stock Number, date of manufacture, and manufacturer's name. When put-up is non-standard, the tag shall indicate the actual length.
4. REGULATORY REQUIREMENTS
4.1 The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4.2 Type 3 tape shall be accompanied by a warning label or sheet calling attention to the generation of hazardous vapors at temperatures above 400 degrees fahrenheit (204 degrees celsius).
5. PRODUCT CONFORMANCE PROVISIONS.
5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producers own drawings, specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business