INCH POUND
MIL-DTL-2522F
6 October 2009
SUPERSEDING
MIL-C-2522E
9 June 1977
DETAIL SPECIFICATION
CORD, FIBROUS LINEN, SHOCK ABSORBER SERVING USE
Inactive for new design after 16 June 1997
This specification in approved for use by all Department and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of braided linen cord.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in section 3, 4, or 5 of this standard.
This section does not include documents cited in other sections of this standard or recommended for
additional information or as examples. While every effort has been made to ensure the completeness of
this list, document users are cautioned that they must meet all specified requirements of documents cited
in section 3, 4, or 5 of this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-191
Textile Test Methods
(Copies of this documents are available online at https://assist.daps.dla.mil or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this specification to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ Z1.4
Sampling Procedures and Tables for Inspection by Attributes
(Copies of this document are available from www.asq.org or the American Society for Quality, 611 East
Wisconsin Avenue, Milwaukee, WI 53202.)
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center
Philadelphia (DSCP), ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or e-mail
to dscpg&inspecomments@dla.mil . Since contact information can change, you may want to verify the
currency of this address information using ASSIST Online database at https://assist.daps.dla.mil .
FSC 4020
AMSC N/A
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business